Showing posts with label is. Show all posts
Showing posts with label is. Show all posts
Sunday, February 23, 2014
MY BED IS IMPORTANT bed frame

I was 12 years old the first time I heard there was a problem with my back.
After some x-rays, the doctor told mom and me that I had a defect in my spine and I would not be able
to have a labour intensive job as an adult. Being a child this didnt mean much to me. I was skinny
and fierce, I excelled at all the sports I played, with awards to show for it all.
I was invincible, what did he know.
to have a labour intensive job as an adult. Being a child this didnt mean much to me. I was skinny
and fierce, I excelled at all the sports I played, with awards to show for it all.
I was invincible, what did he know.
By the time I was 16 I could feel it and I learned to realize each time I had pushed my back too far.
Over the next few years I learned that a good sleep made things feel much better. This is when my bed became very important to me.
Over the years I always made sure I had a haven to retreat to when the day had been too much.
At the age of 20 I broke my lower back and things progressively got worse.
Thats when my bed started to grow. It was so much easier to slip out of bed straight onto my feet or hop in to bed when it was level with me standing so I started to lift my bed making it taller.

This past summer I built a new queen sized bed frame with no foot board to work better with my
storage box spring. I had my sleigh bed long before I got the box spring and they just didnt work
well together so this was a plan I had for awhile. I started with a plain mid-century double sized
headboard. I lifted it and widened it with some new lumber screwed to the outsides of
the original legs. I made the top wider with these fancy carved chair arms.


Here it is in place, you can barely see any of the details with all of my pillows.
But I know its there and get to see what I built every time I make the bed.
The side rails attach to a 2 x 4 at the foot of the bed with two hardwood cabriolet legs on either side.

So that leaves my Queen Sleigh Bed up for grabs and listed in the SHOWROOM

She is not your average sleigh bed, she is amazing. I was traveling for work when
I bought this bed and therefore she was a huge treat to come home to.


Tuesday, February 11, 2014
A Machine Is A Tool Paul Sellers Statements Are Snobbery
Paul Sellers position is that of a snob (and I think, working against the growth of woodworking). You can read for yourself here:
In those closing paragraphs to his 3/16/13 blog entry, Paul says a lot.
Thankfully, I’m not the only (or even the first) to call Paul out on what he’s said. In her blog post, Megan Fitzpatrick, the Editor of Popular Woodworking Magazine put it this way:
These friends, and many, many others, practice a craft known as Woodcraft. They also help teach it to newcomers and spread the joy it entails.

Hopefully I’m helping too. I did think long and hard about it, and I know that my recent suggestion to a beginning woodworker that he use pocket screws instead of hand cut mortise and tenons would fall under Paul’s wrath. I also know my advice provides a much lower barrier to entry and will get completed projects under my friend’s belt. Diving right into hand cut joinery would likely just result in frustration.
To Paul’s snobbish claims, I say a machine is a tool. I use tools and practice Woodcraft. I know that to be true.
Since Paul spreading his snobbery instead of Woodcraft as of late, I’ll leave the last word to Megan.
Editor’s Note:
It has been brought to my attention that Paul’s statements are opinion, and opinion should not be treated as fact. While I agree with this, I feel that simply dismissing Paul’s statements as opinion gives him a pass for the the weight his opinion carries (given his position in the woodworking community) and harm I feel it does to the community.
Read More..
If you’d like to read the full post, or check out Paul’s entire site, you can here.I am still very concerned about children in woodworking issue. Yesterday I saw two girls and one boy in the whole show and only a handful of women. That is no fault of the show,me or the other vendors. I think this is directly attributed to machine manufacturers who do indeed hog the market and have nothing to offer to balance out the problem. Since machines dominate the market of woodworking and in fact invade sanity at every level, we will never see this change. No one seems to be responsible for bringing about change and so the problem goes on. Eventually this situation will be sealed and woodworking could one day become a machine only form of making and no longer a craft.This next comments will indeed get me in deep, deep water. You cannot use a machine to work wood and call it Woodcraft. The machine substitutes for the very thing we call skill and art, but it cannot replace it. Anyone that says a machine is a tool can never understand the art and craft of woodworking. As long as we think and express this, we will never see children and women in the wood shop working with their hands.
![]() |
| The children who were captivated by Chuck Benders hand cut dovetails when the Woodworking Shows visited Somerset, NJ were apparently not in attendance when the shows hit Tampa. |
- He says woodworking “could one day become . . . no longer a craft.”
- He says that its not the Woodworking Show’s fault, his fault or other vendors fault that he didnt see more children at the Woodworking Shows (though Ive heard from others there were many children). He says it’s the machine manufacturers fault that there are so few women and children in attendance.
- He says that since machines are dominating the market and invading sanity and as long as this occurs things will never change.
- He says “You cannot use a machine to work wood and call it Woodcraft.”
| Itll come as a disappointment that this beautiful chandelier is not woodcraft. I hope no ones told Todd yet. Hell be sad. |
I’m glad that we have prominent woodworkers, woodworkers with soapboxes, who promote the craft and don’t discriminate based on method. Megan does more for the craft in her rebuttal to Paul than any hand or power tool does. Tom Iovino is rallying everyone around getting the next generation started with Get Woodworking Week. Matt Kenney proudly proclaims that there is no cheating. Marc Spagnolo just want’s everyone to learn to build. Todd Clippinger constantly asks, “why arent you in your shop?”There are many more examples to which I could point – but that would distract from my assertion that woodworking teachers and writers (and editors) perform a massive disservice to the craft by perpetuating a hard line between hand-tool woodworking and power-tool woodworking. And I find it breathtakingly arrogant (and irresponsibly divisive) to state that only by using hand tools can we call it woodcraft.Machines have eradicated many of the barriers for all people to enjoy woodworking – particularly for those new to the craft (whom, as you imply, Paul, we need to cultivate). In some cases, machines lower the skill level and physical strength required to build something. In addition, machines used to fabricate tools (both hand and power) make those tools affordable to the home woodworker.
These friends, and many, many others, practice a craft known as Woodcraft. They also help teach it to newcomers and spread the joy it entails.

![]() |
| After all the work that went into it, I was disappointed to learn this book stand wasnt woodcraft. |
To Paul’s snobbish claims, I say a machine is a tool. I use tools and practice Woodcraft. I know that to be true.
Since Paul spreading his snobbery instead of Woodcraft as of late, I’ll leave the last word to Megan.
Tools don’t build things; people build things.And statements such as Paul’s help to build nothing.
Editor’s Note:
It has been brought to my attention that Paul’s statements are opinion, and opinion should not be treated as fact. While I agree with this, I feel that simply dismissing Paul’s statements as opinion gives him a pass for the the weight his opinion carries (given his position in the woodworking community) and harm I feel it does to the community.
Wednesday, February 5, 2014
Its beginning to look like a headboard and the winner is

The headboard is beginning to take shape! We didnt get it done before our guests arrive, but I did get the bed in there, so they wont have to sleep on the floor!
--
The giveaway for Flea Market Finds with Matthew Mead has closed - and the winner is ... Katie of At Home When Im with You! Congrats Katie, Ill be in touch!
* number generated via random.org
If you werent the lucky winner you can still purchase a copy at Amazon.com or at your local store.
Hope you have a great weekend!
Saturday, January 25, 2014
The Mystery of the Nib is Solved!
When I got up this morning, I had no idea that in the course of my normal day I would stumble upon the definitive answer to one of woodworkings most puzzling conundrums. But that is exactly what happened!
Thats right, without even meaning to, I have found the solution to the eternal question: "What is the purpose of the nib on old handsaws?"
Who knew that the solution was thoughtfully provided over 80 years ago by a helpful manufacturer of cigarettes? I didnt. And truthfully, I almost missed it today, all because of a slight linguistic twist (or Queens English) that replaces the term "nib" with "notch".
Without further ado, I present to you now, THE ANSWER:


Messrs W.D. and H.O. Wills, of Bristol and London, we salute you! Now the collective mind of the hand tool world can focus anew on the remaining mysteries: bevel up, or bevel down; push or pull planes; Western or Japanese saws; planes resting sole down, or on their sides, or maybe with their toes upon little blocks of wood...
Shop Is Ready
![]() |
| My wife and daughter bought this sign for me, its on the door to the basement area. I carved that little guy years ago . |
Well, it has been a busy few weeks since my last post but the shop is at the point where the tools both hand and power are back in a place where they can be found, and more importantly used.
![]() |
| Overall view walking into the shop area |

I had finished two of the walls with bead board plywood and thought I would stop there but after looking at it, I decided to remove the blanket insulation on the two concrete walls.
![]() |
| Removing blanket insulation |
Replaced the blanket insulation and replaced it with the rigid panel insulation, added fir strips to attach the panels. The outlet/wire mold went in earlier and the lights now operate on a switch at the bottom the the stairs. Two circuits were added by way of a sub panel in another area of the basement. (Thanks Cuz)
![]() |
| Fir strips and rigid panal insulation |
![]() |
| Another view during construction |
![]() |
| Turning area, chair patterns, etc |
![]() |
| Carving bench & clamp storage |
![]() |
| Carving on the wall above the bench |
Overall I am pretty happy with the outcome, what you dont see is utility tube I added on the backside of the wall where the lathe sits. There was plumbing in this area for a roughed in bath, and given we have 3 already, this worked out to be a great area to add the tub (evidently builders dont add those anymore). The other added benefit to that area is gives me a lot of area to store wood and other suppliers. Even with the one window, there is plenty of light. As mentioned in an earlier post, the first big project is building the new workbench. The dust collector is on order but the shop vac is working as a back-up for now. I havent decided on the ceiling yet, maybe later, well see.
Friday, January 24, 2014
The Mallet is almost done! Finally
I was finally able to work a little bit more on the mallet this past weekend. All I need to do now is cut off the excess wood from the wedges and give it a final sanding and then apply some boiled linseed oil and it will be finished!
I made a quick jig to cut the slots for the wedges to go into.



I cut the wedges for the top of the handle at 5 degrees. Next time I think that I will try 3 or 4 degrees.
5 ended up being just a little too big.

5 ended up being just a little too big.

I bought enough wood to make 2 mallets so this is the piece that I am going to
use to make the head of the 2nd mallet. It is the same species that I used for the handle of
my current mallet.

use to make the head of the 2nd mallet. It is the same species that I used for the handle of
my current mallet.

I bought a drum sander kit at Lowes to shape the handle. It is amazing what 50 grit sandpaper can do!
I shaped it with the 50 and then smoothed it with 80 and then 120.

I shaped it with the 50 and then smoothed it with 80 and then 120.


It fits in my hand nicely!


I filed the shoulder down a little so that the head would fit snugly and then sanded everything with
the orbital sander with 120 grit sandpaper.

the orbital sander with 120 grit sandpaper.


I glued the head onto the handle and then the wedges into the slots.




Subscribe to:
Posts (Atom)









